All Categories ​>​ ​EVOLVE Fabrication ​>​ EVOLVE Fabrication - Crippa Implementation Guide

EVOLVE Fabrication - Crippa Implementation Guide

Updated 1 week ago by Adam Heon

Crippa Delivery / Installation

  1. Coordinate delivery with rigging company who will position and set the machine.
    1. Best to have the position on the shop floor marked out and ready
    2. Delivery will consist of: machine, control box, and fencing.
      1. Note: Tooling comes from a different manufactuer / different delivery
  2. Position machine, extend leveling feet out (easier to lower the leveling feet than to raise them once the machine is set)
  3. Set machine in the final position, then level machine using the tooling area
  4. Remove shipping bolts, clean up and misc. assembly
  5. Fencing installation - starting at the machien and working around both sides. This layout should be planned in advance but can be modified during installation
  6. Power connection:
    1. 480v for main power
    2. 120v in area for compressor. The compressor can be stored inside the machine enclosure our outside.
    3. Decide on WiFi or eithernet connection
  7. Machine power up.
  8. Collet adjustments for conduit tension.

EVOLVE Fabrication

  1. Installation Requirements:
    1. EVOLVE Electrical Shop Integration (in Revit)
    2. EVOLVE Fabrication Desktop Client, on each machine, including:
      1. Crippa Desktop
      2. Zebra Printer
      3. QA Workstation (Zebra or COM Scanner)
  2. Confirm Login with EVOLVE user credentials in Revit, Shop website and Desktop Client
  3. Create machine profiles for crippa. Follow bend calibration process.
    1. Create work order
    2. Upload bends from Revit and/or use the EVOLVE Bend Creator
    3. Release Work Order for testing
  4. Run test bends and confirm within tolerance. Adjust / calibrate as needed.
  5. System setup is complete

How did we do?

Powered by HelpDocs (opens in a new tab)

Powered by HelpDocs (opens in a new tab)